Your present location:Home >> products >> Optical relay >> KY,KV,KW-Series MOSFET Output High Capacity Photo Relay
  • Product name: KY,KV,KW-Series MOSFET Output High Capacity Photo Relay
  • Product number: KY,KV,KW MOSFET Output
  • Control Voltage:
  • Load Voltage: 60V
  • Load current: 2000mA
  • Installation:

  • load voltage:60V 

  • Controls low-level analog signals

  • Normal dielectric strength is 2500VAC, and reinforced insulation type dielectric strength is 5000VAC

  • Include DIP and SMD footprint

  • Normally open type,compatible with AC/DC

TYPES

Rated output Dielectric strength Type Packing
Load voltage Load current DIP type SMD type Tube packing type(DIP type) Reel packing type(SMD type)
60V 2000mA 2500VAC KY212G KY212GAX 100pcs/tube 2000pcs/box
40000pcs/carton
2000pcs/reel
30000pcs/carton
5000VAC KY21GH KY212GHAX
2500VAC KV212G KV212GAX 60pcs/tube 1200pcs/box
24000pcs/carton
1000pcs/reel
10000pcs/carton
5000VAC KV212GH KV212GHAX
2500VAC KW212G KW212GAX 50pcs/tube 1000pcs/box
20000pcs/carton
900pcs/reel
9000pcs/carton
5000VAC KW212GH KW212GHAX

Note: 1.SMD types are packed by reel.NO.2 and 3 terminals show the direction for pull of 4-pin types, NO.3 and 4 terminals show the direction for pull of 6-pin types. 
NO.1,2,3 and 4 terminals show the direction for pull of 8-pin types.
2.It said SMD products "AX" did not mark on the logo of products.
3.For space reasons, the "K","Y","V"and "W" did not marke on the logo. 

 

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

Item Symbol KY212G KV212G KY212GH KV212GH KW212G KW212GH Remarks
Input LED current IF 50mA  
LED reverse voltage VR 5V  
Peak forward current IFP 1A f=100Hz Duty Ratio=0.1%
Power dissipation PIN 75mW  
Output Load voltage(Peak AC) VL 60V  
Load current IL 2A Peak AC and DC
Surge current Ipeak 3A 100ms(1 shot),VL=DC
Power dissipation Pout 500mW 800mW  
Total power dissipation PT 550mW 850mW  
Dielectric strength Viso 2500VAC 5000VAC 2500VAC 5000VAC  
Operating temperature Topr -30℃~+85 Non-condensing at
low temperatures
Storage temperature Tstg -40℃~+125  

Note: 1.At the end of product No.,"AX" is omitted. 2.For 6-pin type, the parameter of "load current" and "surge current" in the form match the A conection.

 

ELECTRICAL CHARACTERISTICS(Ta=25℃)

Item  Symbol  KY212G  KV212G KY212GH   KV212GH  KW212G  KW212GH  Remarks
Input Operate current   IFon  5mA max.  IL=max.
Turn off current   IFoff  0.4mA min.  IL=max.
LED dropout voltage   VF  1.5V max.  IF=50mA
Output On resistance   Ron  0.1Ω typ., 0.5Ω max  IF=5mA IL=max. within1s
Off state leakage 
current 
 ILeak  1μA max.  IF=0mA VL=max.
Transfer
characteristics
Turn on time   Ton  5ms max.  IF=5mA IL=max.
Turn off time    Toff  1ms max.  IF=0mA IL=max.
I/O capacitance   Ciso  1.5pF max.  f=1MHz VB=0V
Initial I/O isolation 
resistance 
 Riso  1000MΩ min  500VDC

Note:1. At the end of product No.,"AX" is omitted. 2.In order to the photomos relay are turned on and off correctly, recommended LED current (I) is 5-10mA.

3.For 6-pin type, the parameter of "On resistance" match the A conection

Modem,telephone equipment, communication equipment, computer input equipment, power control, power plant equipment, preventing disaster equipment, warning equipment,security equipment, measuring instruments,sensors,industrial machinery, etc.

Your present location:home >> products >> Optical relay >> KY,KV,KW-Series MOSFET Output High Capacity Photo Relay

XIAMEN JINXINRONG ELECTRONICS CO.,LTD

Ad:No.130,Guankouzhong Road,

Jimei Dist,361023 Xiamen Fujian,China

Mail:info@jinxinrong.com

Hotline:0592-7268263 6387007-8069

Copyright page:Xiamen Jinxinrong Electronics Co., Ltd