Your present location:Home >> products >> Optical relay >> KW Series-MOSFET Output NC Photo Relay
  • Product name: KW Series-MOSFET Output NC Photo Relay
  • Product number: KW(NC) MOSFET Output
  • Control Voltage:
  • Load Voltage: 60V 400V
  • Load current: 120mA 300mA
  • Installation:

  • load voltage:60V and 400V

  • Controls low-level analog signals

  • Normal dielectric strength is 2500VAC, and reinforced insulation type dielectric strength is 5000VAC

  • 8-pin type,include DIP and SMD footprint

  • 2b normally close type,compatible AC/DC

TYPES

Rated output Dielectric strength Type Packing
Load
voltage
Load current DIP type SMD type Tube packing type(DIP type) Reel packing type(SMD type)
60V 300mA 2500VAC
(Ordinatry type)
KW412 KW412AX 50pcs/tube
1000pcs/box
20000pcs/carton
900pcs/reel
9000pcs/carton
400V 120mA KW414 KW414AX
60V 300mA 5000VAC
(Reinforced
insulation type)
KW412H KW412HAX
400V 120mA KW414H KW414HAX

Note: 1.SMD types are packed by reel.NO.1,2,3 and 4 terminals show the direction for pull. 2.It said SMD products "AX" did not mark on the logo of products.

3.For space reasons, the "K"and "W" did not mark on the logo.

 

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

Item Symbol KW412 KW414 KW412H KW414H Remarks
Input LED current IF 50mA  
LED reverse
voltage
VR 5V  
Peak forward
current
IFP 1A f=100Hz Duty Ratio=0.1%
Power dissipation Pin 75mW  
Output Load voltage(Peak AC) VL 60V 400V 60V 400V  
Load current
(A conection)
IL 0.3A 0.12A 0.3A 0.12A Peak AC and DC
Surge current
(A conection)
Ipeak 0.9A 0.3A 0.9A 0.3A 100ms(1 shot),VL=DC
Power dissipation Pout 800mW  
Total power dissipation PT 850mW  
Dielectric strength Viso 2500VAC 5000VAC  
Ambient temperature Topr -30℃~+85 Non-condensing at
low temperatures
Storage temperature Tstg -40℃~+125  

Note: At the end of product No.,"AX" is omitted.

 

ELECTRICAL CHARACTERISTICS(Ta=25℃)

Item Symbol KW412,W412H KW414,W414H Remarks
Input Operate current IFon 5mA max. IL=max.
Turn off current IFoff 0.4mA min. IL=max.
LED dropout voltage VF 1.5V max. IF=50mA
Output On resistance Ron 1Ω typ. 2.5Ω max 20Ω typ.30Ω max IF=0mA IL=max. within 1s
Off state leakage current ILeak 1μA max. IF=5mA VL=max.
Transfer
characteristics
Turn on time Ton 10ms max. 5ms max. IF=0mA IL=max.
Turn off time Toff 1.5ms max. IF=5mA IL=max.
I/O capacitance Ciso 1.5pF max. f=1MHz VB=0V
Initial I/O isolation resistance Riso 1000MΩ min 500VDC

 Note:1. At the end of product No.,"AX" is omitted.2.In order to the photomos relay are turned on and off correctly, recommended LED current (I) is 5-10mA

Modem,telephone equipment, communication equipment, computer input equipment, power control, power plant equipment, preventing disaster equipment, warning equipment, security equipment, measuring instruments,sensors,industrial machinery, etc.

Your present location:home >> products >> Optical relay >> KW Series-MOSFET Output NC Photo Relay

XIAMEN JINXINRONG ELECTRONICS CO.,LTD

Ad:No.130,Guankouzhong Road,

Jimei Dist,361023 Xiamen Fujian,China

Mail:info@jinxinrong.com

Hotline:0592-7268263 6387007-8069

Copyright page:Xiamen Jinxinrong Electronics Co., Ltd