Your present location:Home >> products >> DIN Rail Mount SSRs >> KS55(AC output) SSR
  • Product name: KS55(AC output) SSR
  • Product number: KS55(AC output) SSR
  • Control Voltage: 110VAC 220VAC 4~32VDC AC/DC24V
  • Load Voltage: 240VAC 380VAC 480VAC 600VAC
  • Load current: 10A 20A
  • Installation: Panel Mounting Rail Mounting

● SCR output

● LED status indicator

● DC or AC control

● Photoelectric isolation

● Dielectric strength 4000V

● Built-in RC snubber circuit

● Width 22.4mm,with heatsink

● Can be mounted on 35mm rail(DIN EN50022)

     or be panel mounted

The product is a 22.4mm width heatsink integrated products, with rail clips, can be mounted on 35mm rail mounting and can also be screwed on the panel. The product offer four control voltage specifications: DC (4 ~ 32) V, AC/DC24V, AC (90 ~ 140) V, AC (180 ~ 280) V, the load voltage is AC (48 ~ 280) V, AC (48 ~ 530) V, AC (48 ~ 660) V, load current divided to 10A, 20A. Product dimensions: 100mmX22.4mmX98mm (10A products) and 100mmX22.4mmX126mm (20A products).

Input Parameter (Ta = 25℃)

Control
voltage range
DC input 4VDC~ 32VDC
110VAC input 90VAC~ 140VAC
220VAC input 180VAC~ 280VAC
24V input 19.2VDC/VAC~ 28.8VDC/VAC
Max turn-on voltage DC input 4VDC
110VAC input 90VAC
220VAC input 180VAC
24V input 19.2VDC/VAC
Max turn-off voltage DC input 1VDC
110VAC input 10VAC
220VAC input 10VAC
24V input 2VDC/VAC
        Max.input current 25mA
Reverse
protection voltage
DC input -32VDC

 

Output Parameter (Ta = 25℃)

  口-口口10-口 口-口口20-口
Load voltage
range
口-24口口-口 48VAC~280VAC 
口-48口口-口 48VAC~530VAC 
口-60口口-口  48VAC~660VAC 
Max.transisent
voltage
口-24口口-口   600 Vpk
口-48口口-口   1200 Vpk
口-60口口-口   1600 Vpk
Rated load current 10Arms  20Arms
Min. load current 100mA
Max. surge current (10ms) 160Apk  250Apk  
Max.off-state
leakage
current
口-24口口-口  10mA
口-48口口-口  10mA
口-60口口-口  0.1mA
Max.on-state voltage drop
(Under rated load current)
1.6Vr.m.s.
Max.turn-on
time
DC input(zero cross)  1/2cycle+1ms
DC input(random)  1ms
110VAC input  20ms
220VAC input  20ms
24V input  20ms
Max.turn-off
time
DC input  1/2cycle+1ms
110VAC input  40ms
220VAC input  40ms
24V input  40ms
Frequency range 47Hz~63Hz
Min.power factor 0.5
Min.off-state dv/dt 500V/μs

 

GENERAL (Ta = 25℃)

Dielectric strength 4000VAC,1 minute, input-output
2500VAC,1 minute, input/output-base
Insulation resistance 1000MΩ(500VDC)
Operating temperature -30~ +80
Storage temperature -30~ +100
Unit weight 170g(口-口口10-口)    240g(口-口口20-口)

 

1.Relay is a power device,installation space should beleft between the relay, see below:

2.Installation of relay require ventilation environment,to make sure that the temperature of the heat sink is in any case not exceed 90℃
3.Ground the rail or heatsink
4.Select required screwdriver and wire to connect relay, requirements are as follows:

  INPUT TERMINAL(3、4)   LOAD TERMINAL(1、2) 
Screw type Spring type Screw type
Screwdriver
Specifications
Straight,0.6x3.5mm - Cross 2#,0.8x5.5mm
Recommended
Torque
0.6N.m 1N.m 
Stripping length 7cm  10cm  10cm 
Optional wire Single 
core cable 
1x0.5~2.5mm2
2x0.5~1mm
1x0.5~2.5mm2  2x1.5~6mm2 
Multi-core
cable
(with 
ferrule) 
1x0.5~2.5mm2
2x0.5~1mm2
1x0.5~2.5mm2  1x1.5~10mm2
2x1.5~6mm
AWG 1x20 to 12 2x14 to 10 

 

5. Please do not use the relay beyond the descriptions in the data sheet.

Download attachments : KS55

Your present location:home >> products >> DIN Rail Mount SSRs >> KS55(AC output) SSR

XIAMEN JINXINRONG ELECTRONICS CO.,LTD

Ad:No.130,Guankouzhong Road,

Jimei Dist,361023 Xiamen Fujian,China

Mail:info@jinxinrong.com

Hotline:0592-7268263 6387007-8069

Copyright page:Xiamen Jinxinrong Electronics Co., Ltd