• Product name: KW Series-MOSFET Output NO Photo Relay
  • Product number: KW(NO) MOSFET Output
  • Control Voltage:
  • Load Voltage: 60V 200V 400V 600V
  • Load current: 100mA 130mA 300mA 500mA
  • Installation:

  • load voltage:60V,200V,400V and 600V

  • Controls low-level analog signals

  • Normal dielectric strength is 2500VAC, and reinforced insulation type dielectric strength is 5000VAC

  • 8-pin type, include DIP and SMD footprint

  • 2a normally open type,compatible AC/DC

TYPES

Rated output Dielectric strength Type Packing
Load voltage Load current DIP type SMD type Tube packing type(DIP type) Reel packing type(SMD type)
60V 500mA 2500VAC
(Ordinatry type)
KW212 KW212AX 500pcs/tube
1000pcs/box
20000pcs/carton
900pcs/reel
9000pcs/carton
200V 300mA KW217 KW217AX
400V 130mA KW214 KW214AX
600V 100mA KW216 KW216AX
60V 500mA 5000VAC
(Reinforced
insulation type)
KW212H KW212HAX
200V 300mA KW217H KW217HAX
400V 130mA KW214H KW214HAX
600V 100mA KW216H KW216HAX

Note: 1.SMD types are packed by reel.NO.1,2,3 and 4 terminals show the direction for pull. 2.It said SMD products "AX" did not mark on the logo of products.

3.For space reasons, the "K"and "W" did not mark on the logo.

 

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

Item Symbol KW212 KW217 KW214 KW216 KW212H KW217H KW214H KW216H Remarks
Input LED current  IF  50mA  
LED reverse
voltage
 VR  5V  
Peak forward
current
 IFP  1A  f=100Hz Duty Ratio=0.1%
Power dissipation  PIN  75mW  
Output Load voltage(Peak AC)  VL  60V  200V  400V  600V  60V  200V  400V  600V  
Load current  IL  0.5A  0.3A  0.13A  0.1A  0.5A  0.3A  0.13A  0.1A Peak  AC and DC
Surge current  Ipeak  1A  0.9A  0.3A  0.2A  1A  0.9A  0.3A  0.2A  100ms(1 shot),VL=DC
Power dissipation  Pout  800mW  
Total power dissipation  PT  850mW  
Dielectric strength   Viso  2500VAC  5000VAC  
Operating temperature  Topr  -30℃~+85  Non-condensing at
low temperatures
Storage temperature  Tstg  -40℃~+125  

Note: At the end of product No.,"AX" is omitted.

 

ELECTRICAL CHARACTERISTICS(Ta=25℃)

 Item  Symbol  KW212,W212H  KW217,W217H  KW214,W214H  KW216,W216H Remarks 
 Input  Operate current  IFON  5mA max.  IL=max.
 Turn off current  IFOFF  0.4mA min. IL=max.
 LED dropout voltage  VF  1.5V max.  IF=50mA
 Output  On resistance  Ron  0.5Ω typ.
1Ω max.
4Ω typ.
10Ω max.
 15Ω typ.
30Ω max.
 28Ω typ.
40Ω max.
 IF=5mA IL=max. wihtin 1s
 Off state leakage
current
 ILeak  1μA max.  IF=0mA VL=max.
 Transfer
characteristics
 Turn on time  Ton  2ms max.  IF=5mA IL=max.
 Turn off time  Toff  1ms max.  IF=0mA IL=max.
 I/O capacitance  Ciso  1.5pF max.  f=1MHz VB=0V
 Initial I/O isolation
resistance
 Riso  1000MΩ min.  500VDC

Note:1. At the end of product No.,"AX" is omitted.2.In order to the photomos relay are turned on and off correctly, recommended LED current (I) is 5-10mA

Modem,telephone equipment, communication equipment, computer input equipment, power control, power plant equipment, preventing disaster 

equipment, warning equipment, security equipment, measuring instruments,sensors,industrial machinery, etc.

Your present location:home >> products >> Optical relay >> KW Series-MOSFET Output NO Photo Relay

XIAMEN JINXINRONG ELECTRONICS CO.,LTD

Ad:No.130,Guankouzhong Road,

Jimei Dist,361023 Xiamen Fujian,China

Mail:info@jinxinrong.com

Hotline:0592-7268263 6387007-8069

Copyright page:Xiamen Jinxinrong Electronics Co., Ltd