• Product name: KV Series-MOSFET Output NC Photo Relay
  • Product number: KV(NC) MOSFET Output
  • Control Voltage:
  • Load Voltage: 60V 400V
  • Load current: 120mA 300mA
  • Installation:

  • load voltage:60V and 400V 

  • Controls low-level analog signals

  • Normal dielectric strength is 2500VAC, and reinforced insulation type dielectric strength is 5000VAC

  • 6-pin type,include DIP and SMD footprint

  • 1b normally close type,compatible AC/DC

TYPES

Rated output Dielectric
strength
Type Packing
Load voltage Load current  DIP type  SMD type  Tube packing type(DIP type  Reel packing type(SMD type)
60V 300mA 2500VAC
(Ordinatry type)
 KV412  KV412AX  60pcs/tube
1200pcs/box
24000pcs/carton
 1000pcs/reel
10000pcs/carton
400V 120mA  KV414  KV414AX
60V 300mA

5000VAC(Reinforced
insulation type)

 KV412H  KV412HAX
400V 120mA  KV414H  KV414HAX

Note: 1.SMD types are packed by reel.NO.3 and 4 terminals show the direction for pull.2.It said SMD products "AX" did not mark on the logo of products. 

3.For space reasons, the "K"and "v"did not mark on the logo.

 

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

Item Symbol KV412 KV414 KV412H KV414H Remarks
Input LED forward current IF 50mA  
LED reverse voltage VR 5V  
Peak forward current IFP 1A f=100Hz Duty Ratio=0.1%
Power dissipation Pin 75mW  
Output Load voltage(Peak AC) VL 60V 400V 60V 400V  
Load current
(A conection)
IL 0.3A 0.12A 0.3A 0.12A Peak AC and DC
Surge current
(A conection)
Ipeak 0.9A 0.3A 0.9A 0.3A 100ms(1 shot),VL=DC
Power dissipation Pout 500mW  
Total power dissipation PT 550mW  
Dielectric strength Viso 2500VAC 5000VAC  
Ambient temperature Topr -30~+85 Non-condensing at
low temperatures
Storage temperature Tstg -40~+125  

Note: At the end of product No.,"AX" is omitted.

 

ELECTRICAL CHARACTERISTICS(Ta=25℃)

Item Symbol KV412,KV412H KV414,KV414H Remarks
Input Operate current IFon 5mA max. IL=max.
Turn off current IFoff 0.4mA min. IL=max.
LED dropout voltage VF 1.5V max. IF=50mA
Output On resistance
(A conectiion)
Ron 1Ω typ.2.5Ω max. 20Ω typ.30Ω max. IF=0mA IL=max. within1s
Off state leakage
current
ILeak 1μ A max. IF=5mA VL=max.
Transfer
characteristics
Turn on time Ton 10ms max. 5ms max. IF=0mA IL=max.
Turn off time Toff 1.5ms max. IF=5mA IL=max.
I/O capacitance Ciso 1.5pF max. f=1MHz VB=0V
Initial I/O isolation
resistance
Riso 1000MΩ min. 500VDC

Note:1. At the end of product No.,"AX" is omitted. 2.In order to the photoMOS relay are turned on and off correctly, recommended LED current (I) is 5-10mA.

Modem, telephone equipment, communication equipment, computer input equipment, power control, power plant equipment, preventing disaster equipment, warning equipment, security equipment, measuring instruments,sensors,industrial machinery, etc.

Your present location:home >> products >> Optical relay >> KV Series-MOSFET Output NC Photo Relay

XIAMEN JINXINRONG ELECTRONICS CO.,LTD

Ad:No.130,Guankouzhong Road,

Jimei Dist,361023 Xiamen Fujian,China

Mail:info@jinxinrong.com

Hotline:0592-7268263 6387007-8069

Copyright page:Xiamen Jinxinrong Electronics Co., Ltd