KS8 is a small dimension,single In-line PCB mount SSR. Specially for computer and peripheral equipment interface design, in the form of AC input type and DC output type.
SPECIFICATIONS (Ta = 25℃)
|
Item |
DC Output |
Remarks |
Input
parameter |
Control voltage range |
20% of nominal voltage |
|
Must turn-on voltage |
80% of nominal voltage |
|
Must turn-off voltage |
1VDC |
|
Max. input current |
20mA(120%)Rated Voltage |
|
Output
parameter |
Load voltage range |
(3-30)VDC |
|
Max.load current |
1.0A |
|
Max.surge current(10ms) |
2A |
|
Max.off-state leakage current |
0.1mA |
|
Max.on-state voltage drop |
1.5VDC |
At max.load current |
Max. turn-on time |
1ms |
|
Max. turn-off time |
1ms |
|
Insulation resistance |
1000MΩ(500VDC) |
For input-output |
Dielectric strength |
2500VAC,50Hz/60Hz,1min |
|
Operating temperature |
-30°C~80°C |
|
Storage temperature |
-30°C~100°C |
|
Case color |
Red |
|
Unit weight |
Approx 3.5g |
|
1. Soldering must be completed within 10s at 260°C or less or within 5s at 350°C or less.
2. The SSR case serves to dissipate heat. lnstall the relays so that they are adequately ventilated.lf poor ventilation is unavoidable, the load current must be reduced.
3. Make sure that the polarity is correct when connecting, to avoid damage to the relay.
4. Please do not use the relay beyond the descriptions in the data sheet.